Ok i will try to rise my budget and I found Denso Scara for 11k but end effector was not rotating so it was a problem.
Universal robots arm or Scara is my best choose?
Posts by mogey336
-
-
-
I have a zymark xp robot and i need to change it,it, It's for a fabric factory, The robot picks the fabric sample and put it in a testing chamber to test the light leakage of different chemicals.
I searched for Cylindrical robot but it's over my budget so Can i replace zymark with a scara robot?
That samples need to enter the chamber room in straight line , Can scara make a linear or straight line motionSample weight about 500 grams
Minimum Stroke 30 CM
Maximum Stroke 60 CM
Minimum reach 46 cm
Maximum reach 70 cm1st sample height is 31 cm from ground