Thanks a lot Nation
Only managed to try this now - and the connection was indeed successful for the first time!
Still not getting the contents of \md: but i'll spend some time on it and figure it out
Thanks a lot for your help!
Posts by bahar
-
-
If you want to connect to the robot via Filezilla, you need to setup the server tags (S1, S2, etc), as the robot is acting as the ftp server. The client tags are for if you have a ftp server somewhere that you would like the robot to connect to.
Really you just need to make sure that the server tag for FTP is up and running. Some robot's I've seen it is disabled for whatever reason.
Hello Nation,
Thanks for your suggestions
I am using an an i30-rB Plus, and failing to connect to filezilla.
Is there a software option needed?
also, I have not found where those Server Tags you refer to are? I suppose its on the robot but could not find anything
I have gone through everything I managed to find on the internet for this issue and the server tags are my last thing to try before completely giving up!
-
Ive also had an issue where on SYSTEM CONFIGURATION a variabel was set to remote instead of Operator Panel.
Im using a R30iB
Additionally, in Menu-Setup-System-Config - last line, Soft Operator Panel was set to TRUE instead of FALSE, and so setting it back AUTO mode was able to run again