The leds on the boards
Posts by W4e
-
-
I found out a supplieer without a 24 use source
I think this would be an issue?
-
1 no
2 nothing
3 9za on the red dip switch
4
5 you mean by aux 10 command?
I dont have an floppy but i think that would be possible.
I have more images but i can’t upload it.
-
hello,
this is my forst thread. so let me know if i miss some information.
but i have an kawasaki js 010 with controller a87 (on the monitor stands AD) bought.
i don't know the state of the robot i bougjt it second hand.
the robot had empty batteries on the robot and on the controller. i replaced them and i started the robot after it.
i switched dip 6 and 8. i choice the wrong model controller and choice also the default settings. but now i want to reinstall again.
but when i choice to reinitialise it goes to the home screen.
there it has some errors "-1411 Error of servo A block Codd is 0"
so i red a lot of forms and found the zrobot option i changed it but still the error happend.
i hope someone can help me out.
ps the power of the motors won't go on also not in teach or repeat mode.