Thank you byrol for your help. It would be nice to have a picture how to short-circuiting the required emergency stop tips in the XS1000 socket and any other documents. Thanks to your help I will finally start
Posts by Bubek123
-
-
I did as you wrote but I had only this what I send on picture. I click hand but I couldnt find coordinate system.
-
Thank you very much. Every help is appreciated because women are not taken seriously in this profession. I find out about it.
Thanks for instructions. I will try as soon as I come back.
-
Sorry I'm new in this topic.
Thank you very much I switch on English language.
I don't know how to move axis 3. It's my fault because I bought robot without useful documents, they gave me only user manual but not complete and to different type of KUKA...Could you help me how to move axis 3?
Could you send me user manual and electric diagram if you have it please..
-
Thank you for information.
I will try to move it by joystic or button on control panel. Very important question for me is that possibility to change language because it is in German language
-
203 error.
-
Hi.
Sorry for my not precise information. This robot is in transport position. The error which one is showing on panel is 203. Everything is in German language and I don't know how change it. This what I know is that in cabinet is a red wire jumper which allow to move from transport position but I don't know how to do it. Would be nice to have any user manual for a control panel.
-
Hello!
We just bought a KUKA VK360 with control panel VRS1 C/D VRS2 but we don't have any electric diagram and we don't known how to connect it to make it work. All servo goes on, but control panel says something about joystick error.
Probably we need to make electric jumpers.
Please help