Posts by carlrodr

carlrodr · variable of welding parameter limits carlrodr September 4, 2020 at 7:48 PM

Good afternoon

Could you support me if there is a variable to modify the limits of the welding parameters to reduce their range.

Code

Good afternoon

Could you support me if there is a variable to modify the limits of the welding parameters to reduce their range.

carlrodr · Torch Angle and Travel Angle Progress carlrodr July 15, 2020 at 11:10 PM

Sorry

controller and version the software are in image

carlrodr · Torch Angle and Travel Angle Progress carlrodr July 10, 2020 at 11:42 PM

Good afternoon mates

How can I know the torch Angle, if you save it in a variable or it can be visualized in some way.

Regards

carlrodr · DATA Weld Procedure values TO $AWESCH [1,1] carlrodr March 17, 2020 at 9:28 PM

I would like to know why it does not show me the same DATA Weld Procedure values in the system variable $ AWESCH [1,1]. I have to have a version installed, I need to enable a function ?????

Can anybody help me please

carlrodr · DATA Weld Procedure values TO $AWESCH [1,1] carlrodr March 9, 2020 at 7:45 PM

Code

I would like to know why it does not show me the same DATA Weld Procedure values in the system variable $ AWESCH [1,1]. I have to have a version installed, I need to enable a function ?????

Can anybody help me please

carlrodr · Data Weld Procedure carlrodr March 4, 2020 at 10:18 PM

Code

Good afternoon

I would like to know if there is a way to extract the DATA Weld Procedure values, if anything:

1. save them in a system variable
2. we can extract them by karel
3. If they can be monitored in any way.<img src="https://www.robot-forum.com/attachment/25933-data-weld-procedure-jpg/?thumbnail=1" class="woltlabAttachment" data-attachment-id="25933" id="wcfImgAttachment0">

Advertising from our partners