you mean that there is no way for replacing or adding ethernet board on DX200, don't you?
I see.. I will try to find suitable switch for DX200. Thanks a lot.
you mean that there is no way for replacing or adding ethernet board on DX200, don't you?
I see.. I will try to find suitable switch for DX200. Thanks a lot.
Hi.
There are some Yaskawa robots in my factory.
I tried to get operating information via ethernet port.
(torque, velocity, position, temperature, etc.)
However, there is only one ethernet port in my DX200 and that is already used.
Because two networks(one for the old and the other for new) must be seperated, I want to add one more ethernet card in the DX200.
In this case, Can I add more ethernet port to dx200?
Exchanging the ethernet card in DX200 or adding more ethernet card and so on.
thanks!
Hi.
My company has a production line with Yaskawa industrial robots.
And I tried to monitoring status of robots (temperature, vibration, current and so on)
I heard that Yaskawa sell Y.FAI for this purpose but I think that it is too expensive and overspec for my purpose.
After searching, I found MotoPlus and MotoCom32.
However I have no idea that they can monitoring status of robots whether or not.
If I buy that SDK and develop application, Can I monitoring status of robots?