Hello,
I took another IRC5 robot, made c-start and then create image file of compact flash card. After that, on that robot I was select proper system and robot continue to work without any disruption.
Now, once I inserted cloned compact flash (without any file from previous robot) Boot Application shown on display with menu options Install System, Settings, Select System and Restart Controller.
Once I chose Install System, there was info that I need memory stick to install a system. I was prepared system using Robot Studio System Builder, from backup file, by boot media option. File copied to usb stick, and folder was selected from installation source location. Then system started with reading and finally the new system has been loaded. The controller must be restarted to select new system. Furthermore, robot controller is installing new software, Bootloader decompress image and then instead of main screen, again I've got appearance of Boot Application display, where once I want to select system there is message <No system>.
Where was my mistake?
What to do to fix it?