Ya can start a Test Client in Officelite.
Ya can start a Test Client in Officelite.
Read the manual OfficeLite ab KSS 8.3 B388 Kapitel 3.6 ( Workflow) and Kapitel 5.4.
(In OfficeLite ab KSS 8.5 look different.)
Readme.txt.....
Setup for KUKA technology package
===================================
1. Plug in USB stick.
2. Select Start-up > Install additional software in the main menu.
3. Press New software. If a software package on the USB stick is not displayed,
press Refresh.
4. Select the software package to be installed and press Install. Reply to the request
for confirmation with Yes. The files are copied onto the hard drive.
5. Repeat step 4 if another software package is to be installed from this stick.
6. Remove USB stick.
7. It may be necessary to reboot the controller, depending on the additional
software. In this case, a corresponding prompt is displayed. Confirm with
OK and reboot the robot controller. Installation is resumed and completed.
…..
(Attachment 1)