Also I have switched from Pulse to CV for the new welding schedule. I thought the synergic welding was more of a pulse type schedule. Am I wrong there?
Posts by Idunno
-
-
Your using a synergic weld schedule in your program, so it will act like that. You'll have to create or find another schedule.
So I have created a new welding schedule but I am not seeing an option to toggle Synergic welding on/off. Anychance you could tell me where to find that? I have scoured the internet looking for a hint but there isn't anything. This forum really is my only resource. That being said thanks to everyone who has helped me out.
-
Hey everyone, I'm using a Fanuc M-710ic 20L robot and I'm fairly new to the whole robot scene. I was having a problem with my bead size, it wasn't big enough. To solve that I increased my wire feed speed, the problem I'm having now is that the robot automatically increases the volts and amps to match. That's causing me to blow through my part and weld everything to my jig. Not fun. Is there anyway for me to override that, so that my heat stays the same while my wire feed increases?
-
It goes between faceplate and EoaT, which in this case is a welding gun and Pulse control box
-
More pictures
-
I'm working with a Lincoln System 55 in link with a FANUC M-710ic 20L, automated welder. I have broken a part that I believe to be a Phenolic insulator but for the life of me I can't identify it. Is there anyone out there who knows what the attatched photo is. And even to take it one step farther, could you give me a part number so I can get a new one. Thanks all.
-
Hi everyone, I'm trying to set up a TCP so that the fixed point of my robot it the welding wire at the end my the arm and not the faceplate. I have followed the steps in the book that came with the robot but it doesn't seem right. After recording approach points 1,2,3 and the orient origin point the book tell me to jog while in WORLD in the +X direction 4 inches then record the X direction. But when I jog +X it travels along the Y axis. I continued to do exactly what the book tells me to, even though it doesn't seem right, and then it wants me to go into WORLD coord sytem and jog about the J4, J5, and J6, making sure the tool tip stays above the Torchmate pointer.......not even remotely. Someone please help.
-
Like I said earlier I have never had any training or anything on this. But there are 2 groups, we have a table on one side and a rotary on the other. I keep G1(Table side) WORLD active when I do the calibrating.
-
Hey all, my shop just got a Fanuc M710-ic 20L, and I've been asked to get it going. I have 0 knowledge of this robot, so google and these forums have been a great help. I have been trying to calibrate the arm to resolve a MOTN-049 fault code. So I go into menu>system>master/cal and the pendant tells me the robot has been mastered and calibrated. I then open a program to run only to get the same MOTN-049. Can anyone tell me why it's not saving the calibration?