Hello All,
So what I found was the following:
20: IF GI[1:SELECT PRG.NO.]=2,JMP LBL[12] ;
I am running program 2
Here is label 12:
61: LBL[12] ;
62: PR[26:UN P1 UNCL POS]=P[3] ;
63: JMP LBL[3] ;
What was over writting the PR was line 62. I found up near the beginning was the following:
38:L P[3] 1000mm/sec FINE ;
This line was up under label 1 once I set the P3 to where I needed it to be, I was all set.
I am not the origanal programmer so I am not sure why he did the programming the way he did.
But now I understand what he is doing I am all set.
Thanks for the help
Telgar