Posts by zanic07
-
-
I have been working on creating a cycle counter for some time now. I have something that works fairly well that uses the TPWrite command to display the cycle count and average cycle time per side and the total for both sides. I also have a custom cycle count reset procedure that the operator can select in the part handler to reset the cycle count and times back to 0.
This setup has served me well so far but I would like to add a little more polish into my controllers by utilizing one of the screens in production screen for my cycle count management. Does anyone know how I can edit one of the tabs in the production screen to display a number value and reset the counter when a button is pressed on the pendant.
Any help is greatly appreciated.
thank you.
-
Does anyone happen to know if changing a robots controller ID through RobotStudio will cause any conflicts in the robots programming. I am using all IRC5 controllers with 1660ID arms that are connected to my desk through our network. I am having issues deciphering which robot is which on our network when I click the add controller button to inject routines into the system. Changing the controller ID would solve this problem for me.
Any help is greatly appreciated.
Thank you.