Thank you for your help
I think we will do it without Karel... it was just nice to have.
Thank you for your help
I think we will do it without Karel... it was just nice to have.
Yes you can. Hit the status button on the bottom of the pendant, and then hit F2 for software (might be F3 for config. Not sure). If you have karel, you should see it listed there. It is option R632.
I can´t find the R632...
What I found is:
KAREL Cmd. Language J650
KAREL Run-Time Env. J539
So I suppose thero is no option for KAREL?
Hi,
thank you. I forgot to mention that we don't have Roboguide yet.
The budget for this project is small. This is why I´m searching for alternatives...
Can you tell me how i can figure it out if the robot has this option?
We do not have any Dokumentation about this Robot.
Can I find it out on the pendant?
Thank you
Hello,
since approx 2 weeks we have a FANUC Robot with the R-30iA control in our house. So we are quite new with FANUC Robotics.
Now I would like to write a small test program in KAREL.
Unfortunately we found out that the Roboguide software is needed for converting from Karel to p-code.
Is there a way to bypass Roboguide and use another tool?
Thanks in advance
greetings