Posts by robguy1993

robguy1993 · KR C4 WorkVisual 4.0 Deploy Error robguy1993 July 19, 2019 at 3:13 PM

I do not know. I got a backup from the robot. Then I wanted to install it without making any changes. It did not. The following image appeared on the Resolve conflict tab.

Can I be from Workvisual version? (I use wov 5.0)
My computer is in English.

robguy1993 · KR C4 WorkVisual 4.0 Deploy Error robguy1993 July 19, 2019 at 11:20 AM

Hello everyone,

I have same problem with durmazonur.

I get backup from my KR20-3 (KRC4) and changed profinet device name.
Then I want to deploy same project. But didnt deploy.
I tried merge. And I've solved all the errors. But I didnt deploy again.

Please help me.

robguy1993 · KRC4 ForceTorqueControl robguy1993 June 27, 2019 at 8:07 AM

Hello guys,

I need ForceTorqueControl package. Please help me..

robguy1993 · KUKA external axes robguy1993 June 26, 2019 at 10:21 AM

Hello Everyone,

I have kr c4 kr20-3 robot(version 8.3). And I want to add a external axes(SERVOGRIPPER). I use schunk servogripper.

How I add this external axes ?
How I configure wov project ?

Advertising from our partners