/JOB
//NAME LOAD_B
//POS
///NPOS 0,0,0,0,0,1
///TOOL 0
///POSTYPE PULSE
///PULSE
EX00121=-259671
//INST
///DATE 2014/08/14 11:15
///ATTR SC,RW
///GROUP1 ST3
NOP
CLEAR B000 4
CLEAR I003 1
DIN B000 IG#(26)
SET I003 EXPRESS B000 + 40
DIN B003 SOUT#(66)
JUMP *END IF B003=1
GETS PX121 $PX000
SETE EX121 (1) D[I003]
MOVJ EX121 VJ=50.00 PL=0
*END
END
I have tried to change the high-lighted in red value, its for a load height issue this program only runs after a manual jog and after this program runs it goes back to that value, I have changed it in the variable EX121 touchup in program and loaded program in and changed value, any assistance would be appreciated