Thanks everyone for your help and assistance. I will have a bash next week and see how I get on
Posts by trugroup
-
-
Thanks for the info. The system controller is an R-J3. Looking in the cabinet i have been able to trace back on another output ( conveyor ) to a terminal card/block labelled up as A0D16D. When DO13 ( conveyor ) is called from the TP program 24V dc is triggered. Therefore i am assuming if i locate an output not aleady in use eg DO15, then this would give me 24v dc to power my auduible alarm. Can anybody see any reason why this would not work. Thanks in advance ,Mike.
-
can anybody help ? is there an anyway of programming an audible alarm when a timer expires?. For example , if the cycle time of a robot program is 15 seconds. Can i program a timer to monitor so that if the next cycle exceeds 15 seconds the robot triggers an alarm which can also be audible ?. Is there an output in the cabinet which would power the audible alarm and if so which one is it , and secondly what lines of text would i need to write into the TP. I am not that electrically minded so any easy explanation regarding outputs would be appreciated. i hope this kind of makes sense and thanks for reading. Mike.