Ok I will try that. This is photo of the settings of the three TAST schedules we use. Any idea what these values mean and how the affect TAST?
Posts by Quazik934
-
-
Indeed it is an R30IB controller. Material thickness is 8.5 mm stamped mild steel, welded to a cast steel driveshaft inlet. I guess I'm just wondering what the settings gain,bias,L curv, V curv ect actually mean and do.
-
I'm am wondering what the adjustments in the track TAST program actually mean and do. I work with a dual arm Genesis machine with two Lincoln 455ms' that performs two curcular welds similtaniously. I often have issues with the tracking going away from the seam' crashing into the part and just general innacuracy. I see the TAST perameters in the schedule but don't know what they mean or what would happen if I changed them. Any help would be appreciated