Hi,
I think, You try dismount and mount the main computer board and/or memory board.(And waiting few seconds between dismounting and mounting.) If You have lucky, restart boot process.
Hi,
I think, You try dismount and mount the main computer board and/or memory board.(And waiting few seconds between dismounting and mounting.) If You have lucky, restart boot process.
Yes, if you do I-START the system returns the factory defaults.
Hello,
I think your SMB card is in good state. That not cause your problem.
Do you have a complete backup? If yes, can you try I-START? After I-START your system go to base state. If after I-START (and after smb data update, revolution counter update) your system is running and didn't get failure message you can try switch off and on your controller. (Between off and on you waiting about 20 sec)
-If after switch on you get failure message maybe your capacitor bank or CF card is wrong. (Not satisfied shut down or start up process)
-If after switch on you didn't get failure message you can try restore a backup. If after restore a backup and you get failure messages, your backup include a problem. (f.e. wrong system parameters or program failure)