Hi
load this external axis mediapool by running its exe file once.
Regards
Kadura
Posts by kadura
-
-
Hi
If brake are new, pls cross check if water or humidity has gone to motor.
Regards -
hi
problem what u r describing looks as feedback is not coming during movement of motors so pls check cable.
regards -
Hi
Have you checked cable and voltage reaching to motor brakes before doubting on brake release. -
send me ur email address
-
Just found another one for S4 system too
Program no 3HAB2333-1/08
Serial no
Boot discette label text:BaseWare OS 2.1 -
hi
I have 3HAB2390-2/52 is this useful to you then let me know.
Regards -
Hi
During robot motion if power cut happens and brakes are not new in those case I had observed this problem.
But during power on robot cross checks position data with controller data & in case of difference will ask for revolution update.Regards
-
hi
Being an safety signal , it is linked with power on but can be used without it too.regards