The problem is solved by replacing the KCP. Thx for your help.
Posts by kris.willems
-
-
Hi Leon,
Thanks for your reply. The system wasn't working before. It"s a new setup.
The standard X211c startup connector was present and the wiring of this connector seems to be OK (all jumper wires were present). -
Hello,
We encounter an issue with a KUKA KRC2ed5 controller.
When selecting operation mode "Automatic" or "Automatic external", error 364 (Unknown operation mode (?)) appears.
When T1 or T2 operation mode is selected everything works fine.
Connector X211c is present and is fully wired relating to the wiring diagram (see attach).
Can anyone suggest what can be the cause of this alarm?Thanks alot.
Kris