Hi Guys,
As always after information. Kuka KRC4 with Smart Pad Teach Pendent
We had an issue where the power was cycled on the KRC4 Robot Control System yesterday.
It's interfaced with a Pester Pac can loader system controlled on a separate HMI.
To cut to the chase the Robot still homes but won't execute it's normal operation, we have lost the teach pendent screen [SmartPad].
It initially illuminates with it's Orange Kuka Logo for a few seconds as the system reboots but then goes dark and that's it........
Not sure if it's just the Smart Pad of something to do with the interface and if the system has a graphic card.
Just wondered if anyone has seen a similar fault scenario with a Kuka System and or Smart Pad [Teach Pendent]
Thanks all for your time and assistance,
Regards, Gene