Thank you for the feedback. The root cause turned out to be a loose wire on X5 connector to CI3 board (+Vcc).
Thank you for the feedback. The root cause turned out to be a loose wire on X5 connector to CI3 board (+Vcc).
I have a KRC2 controller that was intermittently dropping out of operation mode. Disconnecting, then reconnecting the X11 plug would re-establish the proper mode. This problem increased in regularity over the course of time to the point where it would not reset. I tried replacing the ESC board but can't reset ANY of the safeties now. Is there a procedure to replacing the ESC board or should I be able to plug and play?