Dear Rohit,
Did you get any solutions for above error. If yes then please share the solution I'm also facing same error.
Thanks,
Dear Rohit,
Did you get any solutions for above error. If yes then please share the solution I'm also facing same error.
Thanks,
Hello All,
I'm facing installation error while installing roboguide on my system(Error Code- 5004 : 0x80070005).it's asking me to close the previous running setup or any other application but i have closed all application & restarted system also but still facing same error.
attached are the error snap.
Thank you for any help you offer.
Hear friends,
Below problem i facing in kuka krc2 can anybody help me on same!
Find below technical details for KUKA Roboic cutting machine.
Robot is supplied KUKA & Software developed by Huahang (China)
# KUKA Robot Internal Axis - 6 Nos motors in Robot
# External Axis - 4 Nos (Rotating Table 2 nos & robot up-down & Swivel motors)
# Robot Type: KR 16-2C
# Article Number :10009884
# Serial Number : 863880
# Mfg Date : 08/2010
# Weight : 235KG
# Range: 1611 MM
# Axis Drive Model: KSD1-32 KUKA
# Control : KRC2 ed5
# Mfg Date : 03/2012
# Programming Software Developer : Huahang (China)
At present we are facing problem of lesser start/calibration and ultimately inaccuracy in result.
We have checked and found there is converter file problem.
At present we have no machine back up.