The same method but different robots. From one robot, I get .png easy and use the same method on the other robot I get only .ls text file, which is useless. So maybe there is a some system variable that I don't know about?
Posts by Dzonzi
-
-
So why sometimes I get image file like .png?
-
Hi,
Sometimes i cannot make a print screen as .png or .jpg file. I get .ls only. What I am doing wrong? Set my pendrive as a device > fcn > 3. print screen. On some robots I get .png. Is there a system variable that should be set to get a print screen as an image?
-
Yes and looks Ok, but others 3 robots has that indicator white
-
Hi,
I have r-30ib Plus controller and there are 2 indicators on it. Power and Fault. Normally Power should be white but in my case is Orange. What is it?
-
is there something like this on the real teach pendant? I mean on the lastest version
-
I have this one but there is no basics like how to create and restore backup/image etc
-
Hi,
I am looking for someone who has a training script from fanuc academy. It can be basic programming training or advanced. Thanks in advance
-
And what can i do with that current speed?
-
And then how to create chart from that? I should write value of these variables in 0.5-1 seconds intervals to Excel. Are you serious?
-
Is there any way to visualize speed of TCP on the chart? How to do that? Krc 8.6.6
-
DECL GLOBAL FDAT point1={TOOL_NO 1,BASE_NO 3,IPO_FRAME #BASE,POINT2[] " "}
What is IPO_Frame and POINT2{} " "? Interpolation frame? What does that do?
-
if you know how far you wanna move the robot... why do you don`t just change the Position data of that point.
Because inc move would be by far more comfortable.
Thanks, I belive there will be newest version of the controller, because they going to exchange the older robots.
Nevertheless im dissapointed.
-
Nobody uses that method. Everybody uses continuous movement for reaching the right position. You know nothing Fabian Munoz. After painting i see on the body how much shift that line in which direction. If i use continuous movment i can shift that line too much or too less.
Do you know how kuka's incremental movement works?
-
2 Jogging it that way , you will not record any point. Next time you run, you are doing the same jogging again
Why/ i do touch up a position after move
-
I would like to use a user key like: deadman + shift + 7 (+x), 4 (+y), 1 (+z). What do you think? Im gonna painting so must be very precise. Sometimes i need to move a painted line a 2-3 mm in one direction to cover a surface etc
-
How to active macro by keys? How to bind them?
And if this is so simple, why Fanuc didnt implemented this as a built-in functionality like in KUKA is?
-
Do you have something like Load data determination (LDD) package? You can check it in work visual.
-
Hello,
It would be very helpful to get an ability to incremental move e.g by 1 mm and maybe 10 mm. It is possible to create something like that with sense?
-
I think fanuc's robots are very wooden. Teach pendent is like 30 years old, but is fast.