My kss is 5.4.10
How to make a new install? I have not found a way to run a new windows setuo.
Posts by Dumidan
-
-
Is there a way to reinstall robot software on a VKRC2 from 2003 with win xp?
I have the win cd and KRC cd but i do not know how to install ?? -
I am new to kuka. How did you do the tool change protocol? I have looked everywhere but nothing is clear.
The i/o is configured i have a stand with tools but i do not know hot to make the tool change program. -
Hey there! Our new KUKA robot is currently being installed and configured as we speak. Before the team of engineers that are setting it up leave, I would love some feedback and any suggestions on how we can ensure it is being setup, configured, and calibrated properly. We want to make sure that everything is being calibrated perfectly, before the engineers wrap up installationI'm hoping someone might have some suggestions, sample files and tests we could run to be able to quickly confirm everything is setup and dialed in perfectly. Any tips on what kind of things to be on the lookout for? Known issues, common problems, etc... Here are some of the questions we have:
- What are the best ways to ensure the 7 axis robot, liner rail, rotary table, and parts change is setup properly?
- Are there any test files that we can use to help us easily test and validate the calibration?
- Are there any other software or tools we should be using?
- What things should we be looking out for in order to ensure the calibration is setup perfectly? (Repeatability, Accuracy, etc...)
- What would be some great projects to test each of the areas?
- What else are we not thinking of?Robot Cell:
- KUKA KR-150 r3100 on a
- Tools: Mill, Hot Wire, (Extruder, Chainsaw, Plasma Cutter, Coming Soon)
- Wireless Touch Sensor
- Robot sits on a 40ft Linear Rail
- 48" Rotary Table
- ATI Quick Connect Head and Plates
- 10 Part Tool Garage Changer
- Laser Part Setter
- Laser FenceSoftware:
- ZBrushGrasshopper
- PowerMill
- Grasshopper
- ArtCamThanks again!
Did you get the configuratio working. I have almost the same and i need some help how did you wire the ati tool change and laser fance. I am gaing to try kuka|prc with grasshoper. Did you find something better?
-
If you are using a KRC2 controller these work fine. (see picture)We had some problems with the cloning software, ghost 11 works fine.
Make sure you format them before you put the image on it.
Rick
Did you use Gost on the KRC2 or did you extract the disk?
My KRC2 ed05 has no CD and i am thinking to install some old ide CD and try it a boot
. -
This is the back of the robot. Any ideea?
-
If you post the files from one job (minimum 3-4file) i can try to make a postprocesar to split any file.
-
I have a second hand kuka kr210-2 ed2005 from 2009 and i have some weird cables on the arm of the robot.
There are also M23 for spindle but if anyone have any idea for what they are before i remove them please help. -
Where can i request the software ti have more chance to get it?
-
Is KRC2-ed5 with 5.66 ok for realtime ethernet?
Robot KR210-2 serie 2000 from 2009 but the control box is from 2007.