Hi Gunjan,
No, if you notice the right side is finished, so the left side should match the same level of the right side.
Here another example.
Hi Gunjan,
No, if you notice the right side is finished, so the left side should match the same level of the right side.
Here another example.
Hello guys,
I got an external axis recently, after a week setting up, I'm still having a very annoying issue that I can't find here, because I don't know how to name it. Basically is well oriented when E1 stay in zero degrees, but when im doing a roughing waterline and rotate E1 for a better positioning is when the craziness comes. Thats why I'm leaving 2 links with a video and maybe you can help me to solve this. Also I want to share with you the settings I'm using.
Tool: X434 Y-0.648 Z89 A0 B90 C0
E1 ROOT POINT: X2191.359 Y-2.155 Z484.897 A-0.102 B-0.417 C0.057
I had to modify this variable as shown because E1 was rotating CCW+, this way is rotating CW+.
$RAT_MOT_AX[7]={N -185,D 1}
$AXIS_DIR[7]=-1
Many thanks in advance for helping.
I got an offer for a Kuka KR200 comp robot
with KRC2d05 controls $10k with 20k work hours. The robot has been fully
tested, serviced, repainted and comes with a 90-day parts warranty is
complete with KRC2 teach pendant and cables.
What do you think guys?
https://www.ebay.com/itm/Kuka-KR150…VwAAOSwIWVY9CF8
Do you think that this one could be a good choice?
Thank you very much!
Hello to everyone, I'm so happy to be part of this forum and here is my first post.
I'm a Cuban industrial designer with knowledge in Rhino and a little bit Grasshopper trying to start my own company of Foam Sculpting and Milling in Florida, USA and I have some questions before jump.
1- I've targeted a second hand KUKA KR150 + KRC1 + Teach pendant included for $5k. Is a good choice for the field that I'm trying to get in?
2- I'd like to know much space I'll need for fencing the robot.
3- There is any website where you can learn how to set up from 0 your Robot?
4- At first it is necessary to buy a turntable? It's ok to split big parts and them join them between?
5- Which brands of spindles are recommended to buy?
7- Which kind of bits are recommended to buy?
6-What kind of tools extra would you recommend to have?
Sorry for my english