I'm using a DX200 powering a MH12. From my JBI file, below, I see how the different points relate to the pulses, C0000 etc. but is there a way to float over a MOV instruction to see what it's coordinate values are without going to that point manually? Some Teach Pendant shortcut?
/JOB
//NAME FIXTURE_MOTOSIM
//POS
///NPOS 5,0,0,1,0,0
///TOOL 0
///POSTYPE PULSE
///PULSE
C00000=84008,-7710,-8021,86820,-26845,-40670
C00001=84008,-11566,-36497,115585,-31158,-56060
C00002=79615,-8410,-33467,119347,-28850,-57639
C00003=86840,-13365,-38166,113404,-32696,-55152
C00004=86840,-11381,-19185,95458,-29122,-45318
P00000=0,0,0,0,0,0
//INST
///DATE 2018/08/23 07:41
///ATTR SC,RW
///GROUP1 RB1
NOP
*TOP
MOVJ P000 VJ=25.00
MOVL C00000 V=500.0
MOVL C00001 V=200.0
MOVL C00002 V=200.0
MOVL C00003 V=200.0
MOVL C00004 V=500.0
MOVJ P000 VJ=25.00
JUMP *TOP
END