I am trying to connect a sensor to dx100. How do I connect the signal from the sensor to dx100? How is the hardware connection. I tried finding a Manual but was not able to find one.
Posts by gauravgupta9595
-
-
I am trying to connect a sensor to dx100. How do I connect the signal from the sensor to dx100? How is the hardware connection. I tried finding a Manual but was not able to find one.
-
I am trying to communicate with DX100 via LAN as mentioned in the High Speed Ethernet Server Function Manual.
I am trying to get the position data with the Robot Position Data Reading Command as per the Manual. The data sent is as follows (This in decimal form): [89, 69, 82, 67, 32, 0, 0, 0, 51, 49, 0, 0, 0, 0, 0, 0, 57, 57, 57, 57, 57, 57, 57, 57, 117, 0, 101, 0, 6, 14, 0, 0]
This is as per the packet format mentioned in the manual. The above data when converted to ASCII & hexadecimal reads as Y,E,R,C,0x20,0,0,0,'3','1',0,0,0,0,0,0,'9','9','9','9','9','9','9','9',0x75,0,101,0,6,0x0E,0,0.
I am getting a error in the reply which is Format Error (Access level error) as per the Manual. I am unable to find the error in the format. Please help.
-
I am trying to communicate with DX100 via LAN as mentioned in the High Speed Ethernet Server Function Manual.
I am trying to get the position data with the Robot Position Data Reading Command as per the Manual. The data sent is as follows (This in decimal form): [89, 69, 82, 67, 32, 0, 0, 0, 51, 49, 0, 0, 0, 0, 0, 0, 57, 57, 57, 57, 57, 57, 57, 57, 117, 0, 101, 0, 6, 14, 0, 0]
This is as per the packet format mentioned in the manual. The above data when converted to ASCII & hexadecimal reads as Y,E,R,C,0x20,0,0,0,'3','1',0,0,0,0,0,0,'9','9','9','9','9','9','9','9',0x75,0,101,0,6,0x0E,0,0.
I am getting a error in the reply which is Format Error (Access level error) as per the Manual. I am unable to find the error in the format. Please help.
-
I am trying to communicate with DX100 via LAN as mentioned in the High Speed Ethernet Server Function Manual.
I am trying to get the position data with the Robot Position Data Reading Command as per the Manual. The data sent is as follows (This in decimal form): [89, 69, 82, 67, 32, 0, 0, 0, 51, 49, 0, 0, 0, 0, 0, 0, 57, 57, 57, 57, 57, 57, 57, 57, 117, 0, 101, 0, 6, 14, 0, 0]
This is as per the packet format mentioned in the manual. The above data when converted to ASCII & hexadecimal reads as Y,E,R,C,0x20,0,0,0,'3','1',0,0,0,0,0,0,'9','9','9','9','9','9','9','9',0x75,0,101,0,6,0x0E,0,0.
I am getting a error in the reply which is Format Error (Access level error) as per the Manual. I am unable to find the error in the format. Please help.
-
I am trying to communicate with DX100 via LAN as mentioned in the High Speed Ethernet Server Function Manual.
I am trying to get the position data with the Robot Position Data Reading Command as per the Manual. The data sent is as follows (This in decimal form): [89, 69, 82, 67, 32, 0, 0, 0, 51, 49, 0, 0, 0, 0, 0, 0, 57, 57, 57, 57, 57, 57, 57, 57, 117, 0, 101, 0, 6, 14, 0, 0]
This is as per the packet format mentioned in the manual. The above data when converted to ASCII & hexadecimal reads as Y,E,R,C,0x20,0,0,0,'3','1',0,0,0,0,0,0,'9','9','9','9','9','9','9','9',0x75,0,101,0,6,0x0E,0,0.
I am getting a error in the reply which is Format Error (Access level error) as per the Manual. I am unable to find the error in the format. Please help.