I-pend.PC conv kit - EE-4707-150-001 REV .E
PWR. SUPPLY - EE-4707-148-001 REV .C
I-pend.PC conv kit - EE-4707-150-001 REV .E
PWR. SUPPLY - EE-4707-148-001 REV .C
also make sure quick menus is not set.
fctn 0 1
should be
Menu
0 (next)
6 (system)
4 (axis limits)
Choose your axis your group and your upper and lower limits. don't forget to cycle power to make changes take effect.
I need to add the ability to edit the data for PR's for specific users, but I can't find what the scrn_id number is
ex. <SCREEN level="4" sp_id="64" scrn_id="23" access="1" rw_access="1"/>
please share
I think the option is
1A05B-2600-J541 ! Password Protection
Z
Refer to the handling tool manual section 5.9 for set up instructions.
We've got it set up on 6 robot cells. 1 drive per tech even with varied levels of access. we originally had a problem getting additional bots set up but it was in the user name and password. They must be the same. go figure.