Hi ergent problem
The robot can stop everywere and give me the error 1133 gear overload axis 4
What can i do to solve this problem
I have tryed to change the hole arm axis 4,5,6 but still the same problem.
Hi ergent problem
The robot can stop everywere and give me the error 1133 gear overload axis 4
What can i do to solve this problem
I have tryed to change the hole arm axis 4,5,6 but still the same problem.
Thanks i will try that.
Hello,
Im starting an old Kuka robot KRC1.
When i start the cabinet, the PC start and then the robotprogram starts and after a while when it shuld be up and running it say prepare for restart and shuts down and restart and so it goes on for hours.
The robot has been working for a couple of weeks and when i should use it it was locked and i restarted the robot with the main swith and thats when the problem occured
Is there any one who can help me resolve this problem.