I'll try, thanks!
Posts by nosman
-
-
Hi all,
I'm a new user of Motoman UP6, I'm looking for 3D file (step, solidwork,..) but I can't find it in the internet. Anybody have this file can share with me?
Many thanks in advanced! -
Hallo,I dont know weather this options are with money.
The ways to transmit and receive robot jobs to controller from PC are1) High Speed Ethernet Server function- It works with Motocom Software (So this is not a good option)
2) Data Communication by Instructions- This is also with Motocom32
3) The other way is FTP- this is simpler Either you can use Filezilla software or write a small batch program where you can send robot job to controller.
Here is sample batch program:
ftp 192.168.255.1
username //generally rcmaster I think
password // Not required, If required 9999999999999999
lcd JOBPATH IN YOUR PC
get JOBNAME:JBI
rcd /JOB
put JOBNAME.JBI
quit
change the bolded one.
Thank you about your helps, rAviteja_g
But I don't have any experiences about FTP.
How can I execute batch program above? -
Hallo,Little bit clear: you saved in .txt file the coordinates? you want to sent which file? .JBI (I mean robot job)
Do you want to transfer robot job from PC to Robot Controller?
Hi rAviteja_g,
I want to send jobs or variables from PC to controller. -
Hi everybody!
I'm trying to integrate a camera to a Motoman robot with XRC controller. The task is to read a couple of coordinates and correct the position for robot. I've been successful read coordinates and sent data to PC (saved in *.txt file) but I can't use this data for the robot. How can I set in XRC controller and in PC for communicate between PC and XRC controller through RS232 (without Motocom32)?
I'm an engineering student and I just work with robot a few months ago so I don't have much experiences. I hope somebody who had sucessfully done this problem can help me.Many thanks in advance!
-
Thanks a lot, I have chosen 3x phase 4mm cable for my robot.
-
Hi everyone,
I have a second hand Motoman UP6 robot and Yasnac XRC controller, but I can't size the power capacity of the controller. How can I choose the size (diameter) of power supply cable for robot?
Thanks in advance.
-
Hi all,
I'm working on a project where I connect HMI Pro-face and DX200 controller (High Speed Ethernet - GP Pro Ex v4.0). My goal is select a particular job by Pro-face and run it, I tried some methods but it didn't work. Any body can help me with this problem?
Many thanks in advance.