Posts by mwilt
-
-
-
Not binding, no error. I don't get it at all.
-
Yes, also changed the tubing, changed everything could possibly change. It just stops feeding wire. And only when it gets warmer weather.
-
Having trouble with wire feed when the temperature gets warmer outside, stops feeding wire once in a while, gets worse as the day goes on. Changed the feeder, power supply, lead, torch, water cooler, ground cables, cable from the power supply to the feeder. Any ideas? Thanks
-
Having issues with this robot not feeding wire, when the temperature get above about 75 degrees outside it wont feed wire, something is heating up. changed the feeder, all ground cables, torch, welder, it is a water cooled torch, put on new water cooler, runs great till the it starts to get hot outside. Any Ideas? this is a tough one.