But If without expert and higher level password, How to "Minimize HMI"! User level do not have "Minimize HMI" function!!!
Posts by CrespoTank
-
-
Ok,thank you for your information!
I don't modify files or folders on the controller. Only modify Project name and cell name on the workvisual. After this i restored the backups by USB.
But the backup without the active project,because the active project named with Chinese. So meybe the name of the file or folder is not consistent now. I don't know how to modify and my workvisual can't connect the robot cell now!I found Projects are all in the path C:\KRC\User\ProjectRoot
-
-
Hello everyone.
The robot has two grippers need to change. But the mechanism need to disconnect the communication cable when switch gripper,So when the robot put down one gripper,the robot lost one station and stop running!!
So how to disable the communication when switch the gripper,after finish switch gripper enable the communication.
I used Profinet communication.
-
I find that the Project use Chinese name Can't backup by USB(Only the project with Chinese name Can't backup,other files are ok ), So i use WorkVisual4.0.13 changed the Project name and the cell name.But after i updata the project,I found a lot of problems(maybe I need use WorkVisual4.0.10), so I use USB restore backup.The robot can work normally!
But now My computer Can't connect the controller by WorkVisual4.0.10 and WorkVisual4.0.13 ,Can't search robot cell.
When i touch Project Management have an ERROR(The installed projects cannot be determined!) ,and without information about the Project(no name no date). -
I tried to restore the backup, but don't used , still can't see the project.
-
Here are the pictures.
-
Hello everyone, I am a newcomer.I have a question hope to get your help, thank you!
The KRC4 controller use WorkVisual4.0.10,But last time i use WorkVisual4.0.13 updata the project. Now have same problem. My computer Can't connect the controller by WorkVisual software,Can't find robot.
When i touch Project Management have an ERROR(The installed projects cannot be determined!) ,Can see the attachment photos.