Hi rumblefish,
the Omron tech give me the driver "GE IP ethernet (TCP Slave)". But he did'nt tell me if someone already test it. It's supposed to support the 90-30 series.
In the HMI i always have the "PLC NO RESPONSE" error. On the Robot side i don't have error.
The ping test is ok.
In the HMI i have PLC Station Number parameter. Normally with Omron PLC i put in the node number of the IP adress but with Fanuc i'm not sure if it's the same.
Port No. is 18245.
Thanks!