It appears that the Honda connector (P/N A63L-0001-0134/16) has been discontinued by manufacturer. Is there an alternative part?
It appears that the Honda connector (P/N A63L-0001-0134/16) has been discontinued by manufacturer. Is there an alternative part?
Exactly, our calculations came out at less than 8. So yeah, balaclava, gloves, face shield, hardhat, long sleeve shirt, pants, etc.
Just wondering how the OEMs (Fanuc, Motoman, Kuka) run electrical maintenance training with non of the above. Maybe they know something I don't. I've reached out to them and am waiting responses. Will share.
Thanks for the sanity check panic mode. Fanuc only has 480 going from main circuit breaker to transformer and as you said is along small wires. After that its 220 all day. Anyway, appreciate your viewpoint.
I've gone to just about every OEM electrical maintenance class (Motoman, Fanuc, Kuka). Non of these required NFPA70e PPE when working inside the control cabinet with power on to access LED alarm codes. Is this a violation of NFPA70e or is this ok. Trying to ensure our maintenance team's safety. Any comments or support is appreciated.
I have a Fanuc LRmate 200iD 7L Master/Slave configuration that I'd like to separate into two stand-alone units.
It appears that all hardware is available in the slave cabinet except the SOP. It would seem that all I need to do is install a new SOP and software.
Am I missing something?
Wondering if anyone have gone down this road and could give me a map.
Thanks in advance!
Thanks! Will do!
We're setup for CIP Safety. I have a bunch of Allen Bradley RSlogix 5000 safety plc's available. Will these work? How difficult are these to set up to satisfy the KUKA?
Thanks again for your help!
Thanks again Panic Mode. I was able to push through and get the modified project loaded. All went well! I've mastered the robot and calibrated my tcp.
I just have one issue...
My system is setup to use a safety plc. Is there anyway to bypass this similar to jumpering out the X11 connector? This system doesn't have an X11 connector, only plc.
I understand the safety issues. This system is only being used for R&D and training.
Thanks again!
Thanks for taking the time to answer.
Unfortunately, this appears to be beyond my knowledge level at this time.
Oh well, guess I'll work on my Fanuc project until my frustration settles.
Thanks again.
I am brand new to the Kuka system. Please excuse my ignorance...
I have an existing KR C4 that was setup to run a KR 210 R2700 extra. I need to set this up to run a KR 16 L6-2.
Can someone point me in the right direction? Manuals, Tutorials, anything?
I realize I'm new to this system, but it seems exceedingly difficult to find setup information.
Thanks for your help!!
I have a new robot with the External Mode Selector option. I'd like to know if I can bypass this and use the SOP selector switch for a demo I need to perform.
I'm a Fanuc newb so be gentle...
I'm new to the Fanuc world and am looking for the "Cycle time logging and display" function on my pendant. Is this an option that must be turned on?