Hi Jonguim,
how far did you get with this?
i am interested in this option, do you have any manuals or information about this?\
kind regards.
Hi Jonguim,
how far did you get with this?
i am interested in this option, do you have any manuals or information about this?\
kind regards.
For what type of controller is this useable? Also on the older controllers? (RJ2?)
Verzonden vanaf mijn iPhone met Tapatalk
Hi Massula,
we can try to compile it with this virtual robot. i dont have the file right here, but i will send you the file.
Thanks in advance!
Hi Lerak,
i sended you an PM, could you reply?
Kind regards.
Hi Lerak, i checked my mail but i did not recieve an email.. can you send it again?
Verzonden vanaf mijn iPhone met Tapatalk
no one? i would be really helped if someone had an compiler for version 4.30.
cheers!
Hi Guys,
i have a Fanuc S420I Robot with RJ2 controller with Sealant 4.3 software.
does anyone of you guys have an way to compile karel programs for this version? i only need 1 program to send the actual position of the robot to the PLC trough profibus.
i found an demo version of Roboguide online but this one only can compile for software 7.2 and when i load this file in the robot an version error comes up.
Is there anyone willing to help me?
Kind regards,
does anyone still have the MakeTP files? i have a copy but the maketp file is corrupted, as soon as i start it, the application crashes.
Nobody?
Verzonden vanaf mijn iPhone met Tapatalk
Hi Guys,
i'm new here, but i could not find my answers so here we go.
first i'll introduce myself: My name is Lars Pluimers, i bought a used Fanuc S420I-IL Robot with RJ2 controller, i want to do some specific things with it, so there are a couple of questions
1. i want to read the Actual Cartesian positions out of the robot with a serial connection. is there an option for this? or do i need to program it in Karel?
2. in the manual i found that there is an option to select for the serial port, (Menu - Setup - F1[TYPE] - Port init - Device it says 5.Current position. but if i enable this, and hook the serial port to a terminal program, there is no data coming out of the port. (if i do a print, then it works)
3. I've read something about Karel, how can i check if my robot supports Karel programming? i made a backup with KFloppy, in some programs a call is made to a program that is no TP progam (at leas it was not in te controller anymore) so i think Karel is enabled.
4. i found the MakeTP exe files on the internet but it seems corrupted, does anyone still have these files and is willing to share them?
5. is there an option to program the robot offline? (i know that the robot has no network connection, but if i can load the programs using KFloppy then i'm OK.)
You guys are great, i already learned a lot from the info on this Forum!