i have tried to reset the pass word per the insrtuctions for reseting the password. i get to the part where i am to "cursor down so that passclr.sv file is highlighted. however i do not see the "passclr.sv to highlight. it is not there.
Posts by Dean
-
-
i do not get the same options to choose from. i can not find the "systems" option to choose to get too the "UI"
-
Fanuc gave me the same advice as you did. however they said i would have to reburn something???? not sure what it was they were talking about. what issues will i have reinstalling the origonal soft ware?
-
no, i have not. i did try to connact Fanuc. still have the "IMSTP" error and password issue
-
would reloading the origonal software work?
-
to answer your question RacerMike123 yes i think i have the origonal software
-
i have v6.22-1B/F. ALSO have a Fanuc Robotics handling tool 6.22-1, project #, Variant #, Serial #. plus a vicking interworks compact flash 128mb.
when i go to menu, setup password, (f3) password. it says no password to modify. i am really lost -
it is asking for a password. i do not have a password we bought it used
-
going to give it a try now!!! i will get back to you. thanks for your time
-
how do i turn on the input to get rid of the "IMSTP" ERROR ? from what i have read I go to I/O, select the "type" , then selest "UOP" however i am not geting "UOP" option. the only options I get are "Digital/Group/Robot" am i doing something wrong? any advice?
-
i do not get the UOP option. i go to I/O, select "type" (f1) and i get these option to choose from : Digital/Group/Robot,
-
thanks for the help. i will go do it now and get back to you. thanks for your time
-
New to robots. we bought a used robot two years ago and just now getting it up and running. it is a fANUC M-710i with an R-j3 controller. i have cleared or jumpered out all the errors but for one. a IMSTP error. i have read that it needs to be turned on. i have tried to turn it on. I a get message "pass word required"and because we bought it used we have no idea what the pass word is. can anybody gie me a detailed list of how i can clear this "IMSTP" error. and how to get around the unknown pass word. i thinking of reseting everything back to default settings. any advice would?