In Nachi SRA210{FD11 Controller} I'm facing a problem that sometimes it misses the spot while running in Auto mode.
We are using Obara A.C timer{STN 21}, and we are controlling this through PLC.
Timer is getting the start switch and it is giving the hold end but it misses the spot.
The weld is on from Robo and HMI as well. We interchanged the timer also but still facing the same problem.
Pl. share some solution.
Posts by AJ
-
-
I have all of the Panasonic manuals in PDF, email me & i'll get ya what ya need.
Hi Pal
If possible then mail the manuals to me alao.
*** removed by moderator ***Thanks & Regards
Sent from my Redmi Note 3 using Tapatalk
-
Does anybody know how to make TCP of gripper?
-
Hi
Facing a problem in Nachi robo, Controller is FD11.
While robo is running in auto mode it stops and start showing the error of Abnormal Servo Tracking Error.
If anyone knows the remedy of this then pl. share