You probably have some terminals in the top part where you have a couple of cables plugged in.
You should connect them to the X11 and then conect the securities or the jumpers in order for the robot to function correctly.
If you have any doubts you can ask me again.
Posts by ablankomartin
-
-
What is extremely long for you? KRC1 normally works on a Win95 basis so it will take quite a while.
If you are in a rush you can get rid of the batteries and power off will shorten a lot, although I wouldnt advice it. -
I have recently purchased a KR150/2 Robot from Renault with KRC1 Controller. We have got rid of all the errors but still have one error and cant get rid of it.
I have looked in the manuals and cant find anything about that error.
The error is the one on the subject: Error 14: Soft PLC: Aplication Base R3.30.
I would apreciate any advice.
Thank you.