Display More
In PROC:
-JobPort "goFr1JobNum"\
-ProgramPort "goFr1PrgNum"In EIO:
-Name "goFr1Mode" -SignalType "GO" -Unit "ioFronius1" -UnitMap "2-4"-Name "goFr1JobNum" -SignalType "GO" -Unit "ioFronius1" -UnitMap "16-23"
-Name "goFr1PrgNum" -SignalType "GO" -Unit "ioFronius1" -UnitMap "24-30"
So it looks like they're all defined which is good news.
But it looks like only voltage and wirefeed are enabled in the masking so have a look and see if you can't enable "schedule"
which should allow you to control one of the three (I think it's job, but I don't remember )
#
ARC_UI_MASKING:-name "default" -uses_voltage -uses_wirefeed
Thank you for answer, I could change between different jobs through the schedule. The robotware arc allows me to change the values for welder speed and the wirefeed, but I can't change the values in the comfort panel of the TPS, maybe because the welder equip it's locked by the robot?
Another question, what is the value "Control" of the Robotware arc?