if input1 = True:
program1()
else:
program2()
if input1 = True:
program1()
else:
program2()
Effective immediately, and for the period of the COVID-19 impact, we’re offering free 30-day subscriptions to On-Demand Training Libraries.
Use promo code ODT-WECARE2020__30 at checkout
https://www.mentor.com/training/cours…imulate-library
It' s really free. The Course doesn't cost anything ,if you use the promo code
Is it possible torun Robcad V9.0 on Windows 10 with Exceed 2008 SP11?
Yes it's possible to run Robcad V 9.0 on Windows 10 , but the latest update must be Windows 10 Creators update, if you have a newer version of Windows you'll get an error and have to reinstall the OS again. See the most common error attached below for this problem.
I can help you. Send me a PM.
Ok. How cand I do that?
Thanks for you're answer!
Hello Everyone!
I want to migrate a Robcad cell into PSI. I' m curently using Robcad 9.0.1 and PSI 13.2. When I want to define the components in Robcad for PSi. I can create new compund parts and resources and got suggestive icons , for other components i get the following message "Error: Can't retrieve object type" and got a red colored icons.(see attached image)
Does anyone know why I can't create compounds for other components in Robcad?
Regards!
Hello,
If you want to open the cell faster you need the .ce (cell) file to be up to 100-120mb or less (It will take about 30-40 min to open.). To do that, I recommend that you move the components from to project to the library folder. Copy the components from the project to the library folder then use Data-Project Utilities-Connection-Replace in order to reatch the connections of the components in the cell , after that you can delete the components from the project.
Best regards,
Bogdan