https://www.youtube.com/watch?v=5hqwYjiudL8
Project Gripper si realizare integrare
Sistemul este in curs de optimizare
Posts by Daniel
-
-
Hello ,
We have an KUKA KR3A robot year 2005 windows95
Can help me somebody with X11 diagram ?
In diagnostic safety have tree external emergency external not ready.
Thank You -
Hi
You can find robot and contoller at http://www.eurobots.net -
Can work with wi95 not with xp
-
Disconnect battery and test if PC start OK.
I have that problem with an new KR C2 conroller ,after recharging battery in external device all work OK. -
Salut Adrian,
Bine ai venit pe forum.
Daniel -
Buna ziua dumnule Dan Lupsa
Ma bucur ca sunteti multumit de robotul cumparat de la noi .
Astept vesti dupa intrarea in productie.
Pentru suport tehnic nu ezitati sa ne contactati.
-
Salutare
ROBOTSISTEM firma cu sediul la Bistrita va ofera o gama diversa de roboti atit noi cit si utilizati impreuna cu soluti complecte de sudura ,paletizare ,vopsire si in curind masinare CNC robotizata.
Oferta noastra o gasiti pe http://www.eurobots.net
firma ROBOTSISTEM find reprentant unic al IME Bilbao pentru Romania.
Pentru detali si consultanta nu ezitati sa ne contactati pe e-mail: dpriscornita@yahoo.com sau Mobil:0745525312Salutare domnule Radu va astept pe la Bistrita .
Daniel -
About the WinXP , someone pass me an image which worked.
"Windows XP embedded Version 2002
Intel Celeron 734MHz 384 Mb RAM
Microsoft Windows 5.1 (Build 2600.xpsp2.040919-1003)KRC V5.2. HF5 version GUI: 1.2.25.0 B69
That means that there is something special to be done when installing the software.
In the 4.1.4 versions under Win95 have to install the SMSETUP in order to install the driver for the DSE. In the WINXP soft there is nothing like that but there must be a way to load this driver. Maybe it has a different name with this version.Or this driver is loaded automatically?
Someone have installation manual for KSS 5.x.x?
Thanks, -
Thank You for answer ,
Motherboards have ISA and PCI
Unfortunately I see the MFC is ISA -
We are trying to upgrade un KRC2 cabinet from Win95 to WinXP (no Ed05). We seem to have the proper hardware
* 320 RAM RAM
* Soyo Motherboard 733MHz
* new DSE-IBS-C33 attached to the MFC2 which came with the win95 version in the KRC2 cabinet
* RDW2 version 4.0 and 4.1We have installed the following software version:
- WinXP 2.00
- Kuka softwareV 5.2.12 Built 69 HF3WInXP starts up without error, yet when the Cross3 starts it gets stuck in 10% and it appears the following warning message (the starting up stops there),
--------------------------
Uploader dll: version 2.01
device driver interface dll (lptw32.dll) version 3.10
driver LPVXWRT.vxd/sys) version 5.00
No shared Memory Network driver yet installed
Error
Invalid version of the device driver (LPVXWRT.vxd/sys)
Actual version= 5.00
needed version = 4.01-------------------------------
Maybe we do not install the soft properly (drivers for the DSE) or maybe we are not installing the right software version.
When we install the KUKA Soft 5.xx we do not install the SMSetup like we do with the 4.xx versions under Win95. I do not think that this is necessary with the 5.2.12 versions because it does it automatically, doesn't it?.
It is clear to us that there is no connection between the DSE and the RDW2.
Under windows95 we have install the SMSETUP in order to install the drivers for the DSE so there is communication with the RDW. That happens in win95 but we do not see any similar application with the Kuka version for XP (versions 5.xxX) . There is no SMSETUP.Any suggestion?
Regards
-
Can you give password for me too?