thanks, I will check and get back to you.
Regards
Mayank
thanks, I will check and get back to you.
Regards
Mayank
thanks, I will check and get back to you.
Regards
Mayank
Hi
I am also facing the same problem. Please suggest what I do.
What does PM1 means.
Regards
Mayank Mishra
Hi
I am using Robot: KR500L360
Control: KRC2 edition 2005
From last few days i have been getting some errors. The list of errors i have on screen:
1229 Ackn watchdog powermodule pm1
200 Drives contactor off
1240 Ackn a1 to a6 without power
1239 Ackn synchronization error drive a1 to a6
2962 Ackn common kid error a1 to a6
1133 Gear torque exceeded A1 to a6
The errors appear mostly when the robot is stationary or some time when it is running.
Now the error frequency is increasing.
After a reboot the controller seems fine again and everything runs normal again.
Pictures are attached for your references.
Regards
Mayank Mishra
robot-forum.com/attachment/28118/robot-forum.com/attachment/28118/
Hi
I am using KRC2 and i would like to know that is there any option to convert automatically from Expert mode to user mode.
If some one working in Expert mode and forget to put system in user mode after doing their work then after some time it will back to user mode automatically.
Regards
Mayank
Hi
Please help me, how to create new Fold and how to rename them.
Regards
Mayank
Hi
We have KRC 2. I would like to hide some logics of a program. Is it possible or not. Please suggest.
Regards
Mayank
Hello
My logic is this, now please tell me how the reset the Counter.
IF count_I[10]>500 THEN
search1()
count_I[10]=count_I[10]+1
ELSE
Search()
ENDIF
Regards
Mayank
Hi
Thanks for help. One more help required, how to reset the counter.
Regards
Mayank
Thanks Bro
I will try this tomorrow and get back to you if will facing any problem.
Regards
Mayank
Hi Everyone
Is some one provide me Advance Programming Manual. I have KRC 2.
Regards
Mayank
Hi
Please help me to add counter in a program. Problem is:-
IF Counter is greater than 100 call Subprogram (), ELSE Subprogram 1 (), how to reset the counter, how counter gets value for increment and is there a way to view your counter so you know what its number it is at?
Regards
Mayank