Hi,
i had the same problem today.
i must change RS59 to value 2 (Job overwrite on external memory device) and RS214 to value 1 (Permit Ethernet job overwrite).
Now its working.
Please try....
Hi,
i had the same problem today.
i must change RS59 to value 2 (Job overwrite on external memory device) and RS214 to value 1 (Permit Ethernet job overwrite).
Now its working.
Please try....
Hi,
thats the problem. with interlock+FWD you will jump above the pause or any waiting-instruction!
In teach mode please use only FWD to run the program to the next waiting instructions or use interlock+Teststart for run the program.
Hi,
this is in the forum since a few days....
my answer is in the last position.
see here:
https://www.robot-forum.com/robotforum/yas…rom-a-new-user/
Hi,
i think that not right.
I have a dX100 robot on external linear-axes.
And i send the position of the linear-axes during the motions to the plc. not in realtime but in internal cpu-time.
thats ok. I use for this the pstart option.
now for the realtime datas i have buy a external sensor/encoder for the linear-axes.
and this is directly connect to the plc.
Hi,
i am trying to import a Process simulate psz file into robot expert.
It ist possible on a easy way?
It is only a handling application, not spot welding !
or need i a external tool for this ?
thanks