hi all,
can we do stepper welding program in fanuc spot welding robots. I heard by doing this we can reduce spatter and gud weld strength. pls guide me how to make this programm. we are using fanuc 2000ic
Posts by Bala - process Engineer
-
-
iam too need to change my password. please give me to steps to do it.
-
hi all,
can you please suggest the best ways of collision prevention and detection. we are using both krc2 and 4 versions. im facing more collision in my line because of manual errors. we are using kuka robots for welding application.please suggest best way to revert back robot to its original position .
tx
BaLa -
-
hi gentleman,
we are using fanuc arc mate robots for welding process . our parts are not consistent so daily we are doing fine touch-ups . according to individuals , while teaching the robots weld length varies. is there any chance of controlling weld length in fanuc robots. can we monitor and stop the robot if it is exceeding the defined weld lenth.
example
weld id : 1
weld lenth actual specification: 100mm
during programing : programmer 1 : 105mm
during programing : programmer 2 : 115mmI exactly need to control this variation from robot.
please give me some technical suggestion. because it is causing a big cost impact.