No way to control your robot via PC?! It runs on windows!! You can install a VNC so easily. It makes life so much easier.
Posts by Snugglasaurus
-
-
And then there was the time someone wanted to commision a ceiling-mount robot, without bothering to mount it to the ceiling. Sitting upright on the shipping pallet, plugged it in, engaged drives... SMASH.
This hurt to read.RS - if reach is so critical, and you are so close to hitting your limits, why not install an external axis slide?! It's such a relatively cheap solution with no risk of the non-uniform wear tilting it will likely cause. Also if taught well you can shave a bit of time off your cycle time!
-
Hi!
I'm trying to find a part number for the resolver cable for an external 7th axis servo (the one that feeds from the base of the robot to the servo motor).
I'm really struggling to find a part number for this from Kuka's documentation and no amount of searching has helped.
Is there anyone here that has any idea of where I could find this? I have their parts catalog but it doesn't return anything useful.
Thanks