Errors code:
232;
1216;
245;
218;
4,
These are the error codes that come out. What is considered firm for 4 years I do not know if they were touched inside.
Modify message
Posts by Apokalips
-
-
I'm sorry, I'm not familiar with the forum.
Then the problem as I understand it may be the connectors? -
Controller krc2;
Kss 4.1.7 -
Errors code:
232;
1216;
245;
218;
4,
These are the error codes that come out. What is considered firm for 4 years I do not know if they were touched inside. -
Having restored a robot stopped for four years, when I go out I go out to move a series of alarms and locks all:
1: Error synchronization module power A1-A2-A3-A4-A5-A6-A7
2: QUIT ERRORE DRIVES A1 No. TRIP
3: Servo bus disturbo DSE 1
4: Battery voltage too low to save
5: ballast resistor switched on too longWho can help me? thanks