Posts by tdl216
-
-
Hey guys,
I am currently trying to establish a connection between my university's computer and our FANUC LR Mate 200ID 4S in order to install iRVision UIF controls. Currently, my issue is that we cannot identify the proper IP addresses for the robot and the computer. We have a LAN cable connecting the controller to a D-Link router, another LAN cable connecting the computer to the router and an ethernet cable connecting the router to the university's internet. Any suggestions or help would be greatly appreciated.
tdl216
-
Thanks!
I am not sure what roboguide is and I am not working on the teach pendant. I am currently using a program called HandlingPRO (Offline Simulation Software) on a desktop. I have tried saving the workcell, which I assume means program, to the USB stick but receive the error: "The workcell path is on an unsupported device type (remote network location, CDROM, etc). The workcell cannot be opened while it is on this device."
-TL
-
I am a student working on setting up a robot for my university lab. My supervisor is asking me to create a program on HandlingPRO, save it to a USB and then run it through the TP. How do I go about doing this and does the robot need to be registered to the computer I am working on? My model is LR Mate 200iD/4S and I would appreciate any tips or suggestions. Thank you!
-TL