Hello,
I would turn off the pendant beep sound. Has someone an idea how?
Thank you.
WTR
Hello,
I would turn off the pendant beep sound. Has someone an idea how?
Thank you.
WTR
Thank you Robodoc.
In MotoSim EG VRC machine lock works. I will test it tommorow on a DX100 controller.
Works machine lock also without a robot? Only a DX100 cabinet. Because I will try to make a dummy DX100 cabinet with a visualation of the robot in MotoSim EG (remote monitor). Do you think it is possible? Or do you have some ideas?
Hello,
I have a question about the SES-II kit of Motoman America.
- Have anybody some experience with the SES-II kit? Works it good?
- How is the visualization of the robot with real positions? REAL-time? Delays?
- Is its possible to add a conveyor tracking en profibus module to the controller?
Thank you.
Hello,
I have a question about dummy servo mode.
When we the rotary switch (I/F board, JANCD-YIF01-1E) select on 6: Dummy servo, functions can test without manipulator (robot). Now we select remote on the programming pendant (key switch), a job will not start with an external start command.
Has anybody some experience or a solution for this problem?
Thank you.
DX100 controller. I think that we have to use MotoSim EG instead of MotoSim EG VRC. Or is that wrong?
Which motosim do you use?
A question, I think its possible to connect MotoSim EG-VRC 5.10 to a real controller. Because the directory have a Hslsrv32.exe file for disconnect from the high speed E-server. Has somebody some experience with MotoSim and a Real controller? Thank you.
The ethernet (high speed ethernet server) port on the controller communicate with a simulation program.
Now we want to connect another pc that write and read some D variables of the robot, UDP protocol.
Two systems that have a different ethernet communication
Is that possible on the controller with the Ethernet/IP pci card?
Have the DX100 Ethernet/IP PCI module for the CPU slots the same function as the default Ethernet port on the CPU?
So like: PC send request --> DX100 receive request
PC receive answer <-- DX100 send answer
Protocol UDP connection.