I've done this by having one of my connections use the robot port IP address and then the other connection in the Logix I/O tree will use DNS. The robots can act as a DNS server if set up appropriately. Doing this allows you to get both connections using one Ethernet card in the logix system and one Ethernet port on the robot. I often need the other port on the robots for robot ring stuff so it works well for us.
Posts by jlobito
-
-
I had Turck create a cable and part numbers for Fanuc EE cables. Saves loads of time and aggravation soldering up those little buggers.
JMSP-2524M-2067-3/S101/S1296 3 meter
JMSP-2524M-2067-5/S101/S1296 5 meter
JMSP-2524M-2067-10/S101/S1296 10 meter -
We are an authorized FANUC integrator. My favorite perks are free training for our employees and access to online documentation for all of the various controller and mechanical generations. The discount is nice but in practice most of our customers have aggressive discount plans in place with FANUC where they prefer to purchase the robots and drop ship to our facility for integration and system runoff.
-
I've done this by having one of my connections use the robot port IP address and then the other connection in the Logix I/O tree will use DNS. The robots can act as a DNS server if set up appropriately. Doing this allows you to get both connections using one Ethernet card in the logix system and one Ethernet port on the robot. I often need the other port on the robots for robot ring stuff so it works well for us.