Hi Phil,
sorry for the delay...
The robots are in sets - 2 robots and 2 controllers. We are located in Germany. My asking Price is 4.200$ each.
If you Need any more Information, please contact me anytime !
Kind regards,
Martin.
Hi Phil,
sorry for the delay...
The robots are in sets - 2 robots and 2 controllers. We are located in Germany. My asking Price is 4.200$ each.
If you Need any more Information, please contact me anytime !
Kind regards,
Martin.
To be up for sale: 2 x Kawasaki Robot FS20N with C40 Controller.
- year of manufacture: 07/2002
- power-on hours: ~30.000
- robots in good condition with less traces of usage
- complete with all connecting cables and programming handheld device
- devices can be inspected / tested anytime ; if you are interested - please contact me.
Hi at all Karel-experts,
Need your help !
I'm going to write a Karel-program for old R-J Controllers (V3.06)
I Need a build in procedure for get/set port comments. I did it already for new Controllers (R-J3iC or later) - here I have the build-ins 'get_port_cmt' and 'set_port_cmt' - it works great !
I will read or write the comments of f.e. digital IO's - but I miss these build-ins in the old karel compilers...
So is there anybody who can help me ...
Cheers !!!
Hi dha,
yes I know - in These Special things is roboguide another world than the real system :-))
The Software Version on my Robot is V4.30 !
Nevertheless thanks for your Support !!!
Hi dha,
unfortunately TPIN[0] works not.
INTO-347 Read I/O-value fail
PRIO-002 Illegal Index
Anyway thanks !!!
Hallo Karel-Spezis,
möchte in einem Karel-Programm auf R-J2 Steuerung die Shift-Taste des Teach-Pendants abfragen. Kann in den Handbüchern leider nicht den entsprechenden Key (TPIN[???]) finden - kann mir hier jemand weiterhelfen?
Bin über jeden Hinweis dankbar !!!
Hello all Karel-specialists,
I want to request the TP-Shift-key in a Karel program (R-J2 Controller). I cannot find any Information about it in the Manuals. I need the TPIN[??]-code for the key.
Is anybody there who can help me?
I'll be grateful for any evidence...
SMA
Hi Karel-specialists,
I need your help...
I get by the call of the built-in procedure SET_ATTR_PROG('TEST', AT_PROTECT, 1, string_value, status) in the status the value '7006'.
I cannot find this value in my Karel Manual.
Is someone out there who knows the meaning of the value 7006 in the status?
Greeting, Martin.